Now that the passenger side mount group buy is pretty much finished, it's time for the driver side mount.
At this point I am planning to make it resemble my mount, but instead of using that stock bracket, I will just weld on another tab on the bottom for that bolt hole. So, it would attach to the frame with two bolts from the top and one on the bottom rear.
Or, if you want to diy attaching the stock battery tray, you can send me that bottom bracket and I'll make it like mine. You'll be on your own for hacking up the stock mount/battery tray to bolt up though.
I am also thinking about slotting the holes where the mount attaches to the transmission so that you can move the engine/trans side to side since the passenger mount is slotted too.
I am open to any design changes, etc.
I would include all the bolts - 3 for the transmission, 3 for the frame, and 1 big one for the mount.
Price is $150 shipped and there will be a $50 non-refundable deposit this time.
I still need to return Jon's passenger mount before he can send me his driver side and Matt is getting me a framerail section for the jig. So, I wont get started on it for at least a week or 2. As with the passenger mount, it should be about 2 weeks from the date the group buy closes until they are ready to ship - so roughly a month from now.
Also, Jon will powdercoat them for $15 plus shipping from him to you (I will ship the mount to him instead of you). You would pay Jon directly, not me.
--Ferdi
(green = paid in full)
1. neuspeedescort - zinc, shipped 4/1
2. SgtRauksauff #1 - zinc and powdercoating, shipped to Jon 4/1
3. SgtRauksauff #2 - zinc and powdercoating, shipped to Jon 4/1
4. wheresthericego - black powdercoating, shipped to Jon 3/30
5. atomicEGT - no coating, shipped 3/26
6. KaleoXtreme - zinc and black powdercoating, shipped to Jon 4/1
7. swalltr207jg - zinc, shipped 4/1
8. Georonimo - unwelded, shipped 3/26
9. wht95scort - powdercoating, shipped to Jon 3/30
10. scortadict - black powdercoating, shipped to Jon 3/30
11. Crazypunkerguy - no coating, shipped 4/6
12. Hadoken - powdercoating, shipped to Jon 3/30
At this point I am planning to make it resemble my mount, but instead of using that stock bracket, I will just weld on another tab on the bottom for that bolt hole. So, it would attach to the frame with two bolts from the top and one on the bottom rear.
Or, if you want to diy attaching the stock battery tray, you can send me that bottom bracket and I'll make it like mine. You'll be on your own for hacking up the stock mount/battery tray to bolt up though.
I am also thinking about slotting the holes where the mount attaches to the transmission so that you can move the engine/trans side to side since the passenger mount is slotted too.
I am open to any design changes, etc.
I would include all the bolts - 3 for the transmission, 3 for the frame, and 1 big one for the mount.
Price is $150 shipped and there will be a $50 non-refundable deposit this time.
I still need to return Jon's passenger mount before he can send me his driver side and Matt is getting me a framerail section for the jig. So, I wont get started on it for at least a week or 2. As with the passenger mount, it should be about 2 weeks from the date the group buy closes until they are ready to ship - so roughly a month from now.
Also, Jon will powdercoat them for $15 plus shipping from him to you (I will ship the mount to him instead of you). You would pay Jon directly, not me.
--Ferdi
(green = paid in full)
1. neuspeedescort - zinc, shipped 4/1
2. SgtRauksauff #1 - zinc and powdercoating, shipped to Jon 4/1
3. SgtRauksauff #2 - zinc and powdercoating, shipped to Jon 4/1
4. wheresthericego - black powdercoating, shipped to Jon 3/30
5. atomicEGT - no coating, shipped 3/26
6. KaleoXtreme - zinc and black powdercoating, shipped to Jon 4/1
7. swalltr207jg - zinc, shipped 4/1
8. Georonimo - unwelded, shipped 3/26
9. wht95scort - powdercoating, shipped to Jon 3/30
10. scortadict - black powdercoating, shipped to Jon 3/30
11. Crazypunkerguy - no coating, shipped 4/6
12. Hadoken - powdercoating, shipped to Jon 3/30
Comment