Announcement
Collapse
No announcement yet.
ford probe GT engine into a 91 escort?
Collapse
X
-
ok i talked to the guy. its a 93 probe GT motor. 93k miles on it. just the engine, no disty, tranny,axles anything. just the engine & the manifolds. $150 and its mine. so i figure i'll through that sucker in the garage. get a comp test done on it. replace all the seals. get some KLZE cams/intake manifold. and then hunt for a V6 mx3. i know where i can get a disty, and JITB said hes got a couple other parts that i need. so just so i know for sure heres my list of parts i need, lemme know if anything is missing:
MX6/Probe:
ECU
Tranny*
Disty
VAF
MX3 V6:
Crossmember
Shift linkage
Motor mounts
Wiring harness
Axles
tranny*
*doesnt matter
After market:
clutch
Better fuel pump? or will the stock GT pump work?1997 U-13 Nissan Altima
Comment
-
Originally posted by T4TURBO^^ i have no clue. could someone help me out? what exactly is the cross member?
in the 2nd pic he posted... see where the jack is placed? That "member" there was the one that I was referring to... Anyone know for sure?
I know that there is another memeber that goes from side to side toward the back where the LCA's are I think.
Comment
-
Originally posted by D323by cross member do you mean the subframe that goes from the front (rad support) to the rear under the motor?
if so, then they are the same for the v6 and the BP.
They are different...and taht is the right part u are showing.. i thin kthe v6 one goes alittle more to one side or something. Because the bottom v6 motor mount is different from the bottom mount on the bp, and the 4cyl B6.Last edited by jitb37; 05-05-2005, 08:34 PM.
Comment
-
Ok guys! i've sourced just about every part that JITB37 listed. but i have a couple questions left.
#1 can anybody hook me up with a V6 tranny? preferrably a 626 with the LSD.
#2 when im hooking everything back up, will i have to change any of the connectors that go to the speedo/tach? i was talking with mazdachad and said hes gonna have to change that stuff and run a cable into the tranny. will i have to do the reverse?
#3 Does anyone has a spare KL02 VAF? i cant locate one around here.
#4 do i have to get a V6 mtx starter/alternator?
all i have left to source is a tranny and vaf. jitb37 i believe has the cross member and shift linkage, so the tranny/money is the only thing holding me back.Last edited by T4TURBO; 05-09-2005, 09:12 AM.1997 U-13 Nissan Altima
Comment
Comment