I still have to wire it in properly.
In looking at some peoples threads I realize that I could use it for the ECU as well which would have negated my need to weld the new bung in. Not a huge deal. I may try it.
I would like this to be an informative and helpful guide to anyone doing this mod so if any information is desired or offered, speak it.
The Manual
You can see that I used a red wire for the ground. It's obviously the ground so don't be confused. The red wire coming from the fuse box is the one on top. That particular power source is switched so the sensor comes on when I start the car per the directions. I just folded black tape over the yellow and brown wires to isolate them as they'd be the ones to hook up to the ECU.
In looking at some peoples threads I realize that I could use it for the ECU as well which would have negated my need to weld the new bung in. Not a huge deal. I may try it.
I would like this to be an informative and helpful guide to anyone doing this mod so if any information is desired or offered, speak it.
The Manual
You can see that I used a red wire for the ground. It's obviously the ground so don't be confused. The red wire coming from the fuse box is the one on top. That particular power source is switched so the sensor comes on when I start the car per the directions. I just folded black tape over the yellow and brown wires to isolate them as they'd be the ones to hook up to the ECU.
Comment