If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
92 BP MX-3
pics of the back side of the head flange, ie the side that mades to the head, also what size are your pipes?, and did you crush the ends of teh pipes to fit the odd bp oval shaped port.
i remember u sent me pics of your emanny a while back and have also like it, currently im building a mini ram style emanny for my 88 323 that will be a boosted bp, now that i killed the b6 sohc with to much boost.
but im going to build a nother turbo manny, simalar to yours for 1 of my 2 boosted egt's.
u get them
92 Mazda MX-3 (2120lbs) (12.4@118@18psi)1.8 DOHC ,Eletromotive TEC II Standalone System, Turbo Ric Project Turbo Kit, Custom intake manifold 80MM Mustang TB, PT67 P-TRIM TURBO, Custom turbo manifold, 3 in. down pipe, Innovate wideband, 1000cc RC Injecters,walbro 255, custom fuel rail, Areomotive FPR, MSD wires, NGK V-Power R5671A-8 plugs, 31 1/2" L x 10 5/8" H x 3 1/2" D Percision Turbo 750HP FMIC , 2.5in intercooler piping, Tial wastegate/BOV, Unrothdox UDP, KIA G-series trans, ACT 6 puck extreme clutch,(Need a twin disc) 30psi guage&10,000RPM tach (autometer)(EQUUS guages), NO I DON'T HAVE A BPT I HAVE A REUGLAR BP-DE. (updated)
nevermind, i missed it at the bottom of your pm.
can you get me a more clear pic of the ports, i think my pipes are 2 i will have to check when i go to my parents this weekend to do some more work,(heated garage, i live in WI) i crushed them and its still cutting of a small portion of flow, maybe my pipes are 2 o.d. like i said i will have to check.
thanks
Yeah... what size are your pipes?... someone else is using 1.5".
Thanks again for the pictures!
JoN - Automotive Machinist Journeyman/Refrigeration Mechanic Journeyman
Member of MX-3.com
1996 Mazda MX-3 RS - Creek Blue Mica
1993 Mazda MX-3 GS SE - Raspberry... RIP
92 BP MX-3 can you post all pics you sent out to people by pm, so everyone can see them.
also the pipes i got a 1.5 i.d.
any pics of the outside of the collector?
92 BP MX-3 can you post all pics you sent out to people by pm, so everyone can see them.
also the pipes i got a 1.5 i.d.
any pics of the outside of the collector?
just call me lime
i don't like 92 BP MX-3 wish i could change it..
92 Mazda MX-3 (2120lbs) (12.4@118@18psi)1.8 DOHC ,Eletromotive TEC II Standalone System, Turbo Ric Project Turbo Kit, Custom intake manifold 80MM Mustang TB, PT67 P-TRIM TURBO, Custom turbo manifold, 3 in. down pipe, Innovate wideband, 1000cc RC Injecters,walbro 255, custom fuel rail, Areomotive FPR, MSD wires, NGK V-Power R5671A-8 plugs, 31 1/2" L x 10 5/8" H x 3 1/2" D Percision Turbo 750HP FMIC , 2.5in intercooler piping, Tial wastegate/BOV, Unrothdox UDP, KIA G-series trans, ACT 6 puck extreme clutch,(Need a twin disc) 30psi guage&10,000RPM tach (autometer)(EQUUS guages), NO I DON'T HAVE A BPT I HAVE A REUGLAR BP-DE. (updated)
Comment