Any updates?
Announcement
Collapse
No announcement yet.
Shawn's V6 323 worklog
Collapse
X
-
Moar pics while you're at it too
HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
Soon to be powered by a Precision snail on crack...
Add me on more pictures of my projects can be found there.
Comment
-
More pics to come :p
I pulled the olde harness and distributor saturday, I also started my switch panel/ radio delete. More progress to come after the parents go home."Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LX
Comment
-
Any updates?
HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
Soon to be powered by a Precision snail on crack...
Add me on more pictures of my projects can be found there.
Comment
-
Not much to update yet, parents left saturday night and I've been busy with work since. Ill have some updates tonight seeing as the rest of the week it will be pouring from earl's feeder bands"Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LX
Comment
-
You're welcome to come barrow garage space to work in if you need it.
HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
Soon to be powered by a Precision snail on crack...
Add me on more pictures of my projects can be found there.
Comment
-
Ill probably take you up on that after it actually runs. Just need to finish a bit more wiring then it should start."Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LX
Comment
-
UPDATE:
it runs again!!
after having issues with a small flood and my wiring i found out my fuel pump relay bit the dust, so after jumping the wires it started the first try on the base map.
notable inclusions on this version of ShawnsZE323pileoparts:
KLG4 coilpacks
36-1 crank pulley
no distributor
shaodome built MS"Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LX
Comment
-
BTW instead of running that cap in the coolant hose, you can just drill and tap a nipple on your coolant neck and then jstu run a hose off there into a resavoir
thats what ive done and i never see temps higher than 190 unless im at a long ass stop light1996 V6 Escort
1993 escort wagon DE/ZE hyrbid, ported heads, 5 lbs
Comment
-
I have seen the nipple in the water pipe setup, and as soon and the car comes back apart I will be doing something similar but I'm out of time right now.
Besides, this car is simply my rolling proof of concept. ill be rethinking a lot of stuff when its down again$"Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LX
Comment
-
OK so updates and such..
since my last update I have:
been to the dyno twice to get my car tuned
drove the hell out of it.
replaced a few maintenance items (dam Alt belt blew up on the dyno)
to be done is the next few days:
new few box wiring to be installed (thanks jinx/m323)
finish welding on the exhaust, maybe install a flowmaster muffler again.
pull out my engine harness and shape up its overweight ass
pull the cowl and fix my water leak
mount all my gauges and make the tach/speedo work again. (curious on what i can do with the MS once is has a MPH reading.. hmmm)
put on new tires, mine are dead (see: drove the hell out of it)
to do before the end of the year:
get a set of D2 coilovers
put in my front swaybar
replace brakes all the way around
redo clutch line
replace radiator setup
hopefully once my wideband is here Ill be logging some more hours to do some behind the wheel tuning."Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LX
Comment
-
oh yeah and pics
"Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LX
Comment
-
pulled an entire mx3 harness today.
also started the car and ran it for a bit, I have a bracket race the weekend of the 5th to prepare for :x
Last edited by MD323; 11-27-2010, 06:08 PM."Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LX
Comment
-
Glad to see it running again!!
HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
Soon to be powered by a Precision snail on crack...
Add me on more pictures of my projects can be found there.
Comment
Comment