Got a little more porting done to day. It slow going, my air compressor is just a little too small to run a die-grinder.
But here's my sweet new work bench!
![](http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs132.snc3/17938_1232778461418_1287867957_30808319_5745231_n.jpg)
I don't know how I worked with out one!
![](http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs132.snc3/17938_1232778421417_1287867957_30808318_959932_n.jpg)
I started cutting out a new throttle flange for the supra throttle, don't worry Antonio I've still got plans for that mustang throttle.
![](http://hphotos-snc3.fbcdn.net/hs152.snc3/17938_1232778501419_1287867957_30808320_6496190_n.jpg)
And this is what took me most the day. I cut off the little flange that the purge control solenoid bolted to and there was also a TON of casting flash!
But here's my sweet new work bench!
![](http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs132.snc3/17938_1232778461418_1287867957_30808319_5745231_n.jpg)
I don't know how I worked with out one!
![](http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs132.snc3/17938_1232778421417_1287867957_30808318_959932_n.jpg)
I started cutting out a new throttle flange for the supra throttle, don't worry Antonio I've still got plans for that mustang throttle.
![](http://hphotos-snc3.fbcdn.net/hs152.snc3/17938_1232778501419_1287867957_30808320_6496190_n.jpg)
And this is what took me most the day. I cut off the little flange that the purge control solenoid bolted to and there was also a TON of casting flash!
Comment